View Full Version : Will This Rim Work on my 01 Sporty

6th April 2007, 00:00
What size is the rear axle on an 01 1200 Custom? I am trying to figure out if a spoke rim on Ebay will fit my Sporty. Here's a link to it, if that would help.

6th April 2007, 02:42
sounds like it should fit from the description on the ad.

Joe Dirt
6th April 2007, 03:07
It looks like the wheel will fit, but I think that is a BT pulley.

bills bikes
6th April 2007, 03:53
that the same wheel i use on my 05 i had to open it up for a 1" bearing on mine. the pulley and disk will bolt right up and it 3/4" axle. i paid 100 for mine with tire and chrome pulley on ebay

6th April 2007, 04:18
I am not worried about the pulley. What do you mean by opening it up for the bearing?

bills bikes
6th April 2007, 04:57
mine takes 1" axle so i had to open up for the spacer to fit the hole was to small you should not have to do anything as you have a 3/4" axle

6th April 2007, 16:36
Thanks for the info. I will give it a try.

6th April 2007, 16:47
Like Leo said, looks like a go.......:geek:geek:geek

6th April 2007, 17:05
That 70 tooth pulley is off a big twin (i believe somebody already said that) whether you can flip the wheel, i dunno, i doubt it. However, the 70 tooth pulley, is that a 1 1/8 or a 1 1/2 in pulley (belt), then this will affect your gearing like this: your factory pulley is a 61 tooth, results in 68 MPH at 3000
changing to a 70 tooh pulley will result in 59 MPH at 3000 .. are you sure you wish to do that?

7th April 2007, 03:40
I just want the rim. I will use my stock pulley.