Thread: Rubbermount_EFI Security system
View Single Post
  #12  
Old 19th June 2018
Toejam503's Avatar
Toejam503 Toejam503 is offline
Subscribing Biker
 
Join Date: May 2010
Location: Dakota Territory
Posts: 819
Reputation: 1198553
Toejam503 has a reputation beyond reputeToejam503 has a reputation beyond reputeToejam503 has a reputation beyond reputeToejam503 has a reputation beyond reputeToejam503 has a reputation beyond reputeToejam503 has a reputation beyond reputeToejam503 has a reputation beyond reputeToejam503 has a reputation beyond reputeToejam503 has a reputation beyond reputeToejam503 has a reputation beyond reputeToejam503 has a reputation beyond repute
Default

TSSM Security Module Resetting Procedure.

For 2001 and up Harley Davidsons with TSSM Security Module, (key icon displays when key is turned to ignition position)

if your security light stays on for a prolonged period of time, if you have changed your battery or disconnected your battery when fitting components such as LED turns & if you have fitted LED turns without a load equalizer, you will need to reprogram your OEM Module.

text in red below step procedure is confirmation of action, always wait for confirmation before hitting the next step:


step # 1. move handle bar kill switch to off position

step # 2. turn your ignition key: on-off, on-off then on

step # 3. hit the left turn signal twice.
your turn signals and indicator light will flash 1 - 3 flashes

step # 4. hit the right turn signal once.
turn signals and indicator light will flash once.

step # 5. hit the right turn signal once.
turn and indicator signals will flash twice.

step # 6. hit right turn signal once.
turn and indicator signals will flash three times.

step # 7. hit left turn signal once.
turn and indicator signals flash to indicate error code
(see error code thread)

step # 8. to now clear codes, hit left turn signal and hold down for 6 seconds until confirmation.
turn and indicator signals flash twice.

step # 9. turn the ign switch to off


Thats it, TSSM is now reset and ready to roll

Try this and if it doesn't work I have another procedure to try, good luck
Reply With Quote