ACCEL 140414N Stealth SuperCoil

[HOG63]

Hi all. Just ordered a ACCEL 140414N Stealth SuperCoil.
It has an ‘07 up 4-pin connector plug (joined to each coil) that I need to connect to my ‘05 3-pin deusch plug.
I’m thinking I need to cut the new cable and fit a new deusch 3-pin plug joining the two hot wires together. Correct?
All advice welcome.

https://www.holley.com/products/mari.../parts/140414N

https://documents.holley.com/copinst2.pdf

[HOG63]

I found this thread as a reference:
http://xlforum.net/forums/showthread.php?t=1159284

[IXL2Relax]

Yes - Change the 4-wire connector to a 3-wire connector by splicing the two Power Feeds together to mate with the wiring harness 3-wire connector.

Your svc manual schematic should show the connections you need to the wiring harness connector.

A - YELLOW/Blue is Rear Cyl Coil Trigger
B - WHITE/Black is Power to the Coil
C - BLUE/Orange is Front Cyl Coil Trigger


IXL _______ >>>> My Motorcycle Chronicles Are Here <<<<
For Sportster Tech Info:
Ride On The Sportsterpedia - A Toll-Free XLForum Information Highway!

[HOG63]

Thanks IXL, do you know the standard A, B wire colours of the 4-pin ‘07 by chance?
Hoping the coil maker used same as HD colours. But I guess I can tell by the resistance too…

[IXL2Relax]

I checked - This:

2007 Ignition Coil Connector
A - YELLOW/Green
B - Jumpered to A - YELLOW/Green
C - YELLOW/Blue - Rear Cyl Coil Trigger
D - BLUE/Orange - Front Cyl Coil Trigger

IXL _______ >>>> My Motorcycle Chronicles Are Here <<<<
For Sportster Tech Info:
Ride On The Sportsterpedia - A Toll-Free XLForum Information Highway!

[HOG63]

LEGEND.
Many thanks 😊

[HOG63]

See before and after pics:



https://imgur.com/a/OqRRIFj

[IXL2Relax]

Thanks for updating the thread.
Looks like a nice installation.


IXL _______ >>>> My Motorcycle Chronicles Are Here <<<<
For Sportster Tech Info:
Ride On The Sportsterpedia - A Toll-Free XLForum Information Highway!