The Sportster and Buell Motorcycle Forum - The XLFORUM®
 

Go Back   The Sportster and Buell Motorcycle Forum - The XLFORUM® > SPORTSTER MOTORCYCLE FORUM > Sportster Motorcycle Intake and Exhaust > Sportster Motorcycle Air intake, Carburetor, EFI, Fuel, and Exhaust
XLF Blogs XLF Arcade XLF Disclaimer/Privacy Statement/Terms Of Use

Sportster Motorcycle Air intake, Carburetor, EFI, Fuel, and Exhaust Problems, advice and/or how tos for Sporster and Buell motorcycle carburators, Electronic Fuel Injection (EFI), Air Intake, Fuel and Exhaust.

Active Threads
0 Wire question, 30A breaker to starter...
Last Post: LenC
Posted On: 3 Minutes Ago
Replies: 0
Views: 1
0 Roadside Manners
Last Post: owlsplace
Posted On: 8 Minutes Ago
Replies: 0
Views: 3
0 My wife wanted a Swimming Pool
Last Post: Toejam503
Posted On: 9 Minutes Ago
Replies: 14
Views: 728
0 Patriot Defender whats the next best exhaust?
Last Post: madnss
Posted On: 12 Minutes Ago
Replies: 167
Views: 32,381
0 Ride Report 2019 Black Hills, Grand Teton Mtns., Rocky Mountain Ntl. Park
Last Post: DK Custom
Posted On: 15 Minutes Ago
Replies: 58
Views: 2,382
0 Cold Start. Then stall
Last Post: Lukidj
Posted On: 30 Minutes Ago
Replies: 12
Views: 331
0 Triumph or Harley!
Last Post: heyshott 81
Posted On: 30 Minutes Ago
Replies: 12
Views: 525
8 Rear Brake Light Switch Bad
Last Post: THEWILDONE
Posted On: 41 Minutes Ago
Replies: 12
Views: 5,416
0 What song do you have stuck in your head?
Last Post: heyshott 81
Posted On: 45 Minutes Ago
Replies: 2,219
Views: 199,107
0 28 years later..
Last Post: Highly-Dangerous
Posted On: 56 Minutes Ago
Replies: 31
Views: 1,120
0 In tank pump and filter work
Last Post: smm1200
Posted On: 1 Hour Ago
Replies: 2
Views: 145
0 Hardtail frame conversion with 3" stretch and avoiding a chain conversion kit
Last Post: jharback
Posted On: 1 Hour Ago
Replies: 7
Views: 205
0 Pushrod cover seals
Last Post: mfc
Posted On: 2 Hours Ago
Replies: 5
Views: 112
0 Alternator/generator Conversion
Last Post: wymanv
Posted On: 2 Hours Ago
Replies: 139
Views: 68,900
12 POLL: How many times have you dropped a motorcycle?
Last Post: Graywolf
Posted On: 2 Hours Ago
Replies: 638
Views: 113,039
2 Memory Highway
Last Post: Highly-Dangerous
Posted On: 2 Hours Ago
Replies: 1
Views: 59
0 Official XL Forum Random Image Thread (NO NUDITY!)
Last Post: Graywolf
Posted On: 3 Hours Ago
Replies: 44,377
Views: 6,969,065
0 Hot Rods, Rat Rods, and Customs.
Last Post: Stairman
Posted On: 3 Hours Ago
Replies: 3,524
Views: 416,849
0 Hottie of the day, no nudity.
Last Post: Stairman
Posted On: 3 Hours Ago
Replies: 12,293
Views: 1,120,902
0 2010 xl 1200 low solo seat fit
Last Post: Folkie
Posted On: 3 Hours Ago
Replies: 6
Views: 149
0 Hi From NJ
Last Post: Calcustom
Posted On: 4 Hours Ago
Replies: 15
Views: 253
0 Cost of ejikation
Last Post: owlsplace
Posted On: 4 Hours Ago
Replies: 1
Views: 157
0 What did you do for your sporty Today?
Last Post: Skuzeee
Posted On: 4 Hours Ago
Replies: 6,140
Views: 780,462
0 Best way to 883->1200cc ?
Last Post: aswracing
Posted On: 4 Hours Ago
Replies: 13
Views: 435
0 Clutch issues
Last Post: rocketmangb
Posted On: 4 Hours Ago
Replies: 10
Views: 280
0 Primary will not seal
Last Post: Toejam503
Posted On: 5 Hours Ago
Replies: 2
Views: 72
0 Tillotson Welch Plugs
Last Post: Coz
Posted On: 5 Hours Ago
Replies: 0
Views: 61
14 HD ad for Dirt?
Last Post: gusm2
Posted On: 7 Hours Ago
Replies: 2
Views: 165
0 Bearing questions
Last Post: bustert
Posted On: 7 Hours Ago
Replies: 12
Views: 462
0 Turn signals and switch required 1972 xlch
Last Post: bustert
Posted On: 7 Hours Ago
Replies: 4
Views: 181
More...
Members Birthdays
oakies, Gunhappy2 (61), SamIam (55), biggdann (49), boyer911 (49), danii (42), PVD24 (40)
Sponsored Links
Reply
 
Share Thread Tools Display Modes
  #21  
Old 4 Weeks Ago
rocketmangb's Avatar
rocketmangb rocketmangb is offline
XL FORUM TEAM MEMBER
 
Join Date: Jan 2008
Location: So Cal
Posts: 21,001
Sportster/Buell Model: XL1200C
Sportster/Buell Year: 2006
Sportster/Buell Model #2: XL1200C
Sportster/Buell Year #2: 2006
Other Motorcycle Model: 48 "Totalled" By a Douche
Other Motorcycle Year: 2012
Reputation: 3656817
rocketmangb has a reputation beyond reputerocketmangb has a reputation beyond reputerocketmangb has a reputation beyond reputerocketmangb has a reputation beyond reputerocketmangb has a reputation beyond reputerocketmangb has a reputation beyond reputerocketmangb has a reputation beyond reputerocketmangb has a reputation beyond reputerocketmangb has a reputation beyond reputerocketmangb has a reputation beyond reputerocketmangb has a reputation beyond repute
Default

Without pix it never happened !
__________________
Thy Sportster Come
It Shall Be Done
On Earth as it is on Salt
2006 Sportster XL1250C
Hammer Sledge Heads 1.98X1.61 Valves
Hammer 600 Cams
Big Ass CP/Hammer Pistons
Mikuni HSR 45 /Hammer Billet Manifold (Now HSR 48)
Jetted 27.5 slow,182.5 Main
97 Needle,Clip posistion 3
Hurricane Flow 3" offset AC,Rocketman Mod
Daytona Twin Tec TC88A,Rico Scarecrow Map
Sumax Thundervolt plug wires,NGK DCPR8EIX spark plugs. Gapped .040 and Indexed
Cycle Electric Stator and Regulator
Alto Carbonite Clutch
Royal Purple 20W50 MC Primary oil
Patriot Defender Pipe
Royal Purple 20W50 MC Engine Oil
Napa 7148 oil filter
Max Power, 111.47
Max Torque, 84.39
Best 1/4 Mile ET to date 11.85
Best 1/4 Speed to date 115.14
Build by Jester Motorwerkz West
Reply With Quote
  #22  
Old 4 Weeks Ago
60Gunner's Avatar
60Gunner 60Gunner is offline
Chief of Security
 
Join Date: Sep 2017
Location: United States
Posts: 1,383
Sportster/Buell Model: 1200/1250C
Sportster/Buell Year: 05
Reputation: 1626312
60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute
Default

Just as I figured. A little rich at idle once it warmed up. 12.5 - 12.8. 12.8 - 13.1 on the needle. Got I to the taper a little and after the initial squirt of fuel dropping it into the upper 12s it leaned out a little,mid to upper 13s. Mid to upper 14s a flash of 15 here and there on decel. Didn't get in yo it for long. Storms rolling in. But overall I'm pretty confident on it's accuracy.
Pics shortly.
__________________
05 1200/1250C/Hammer 570 Cams/E1 clutch kit
TC88A Gunner's V00D00 map/DCPR7E/Taylor Pro 8mm
S&S Premium Lifters/KhromeWerks HP Plus 3" slip ons
HSR42 25 pilot 1 1/2 turns 97 needle 2nd groove 170 main
Dragtron II AC K&N filter/VR1 20W50/Spectro 85wt Primary Oil

Reply With Quote
  #23  
Old 4 Weeks Ago
60Gunner's Avatar
60Gunner 60Gunner is offline
Chief of Security
 
Join Date: Sep 2017
Location: United States
Posts: 1,383
Sportster/Buell Model: 1200/1250C
Sportster/Buell Year: 05
Reputation: 1626312
60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute
Default

The unit initializing when the key is turned on. The needle for lambda data sweeps up and down.

This is the 2 wire harnesses coming out and going in around the neck and under the tank like the rest of my wiring.

Here's the sensor with a 3 foot harness heading for the same place. It plugs into one of the harnesses plugged into the gauge that is 10 feet long.
All going in under the tank and running on top of the backbone. The power one is hooked to a fuse with a mini piggyback set up Rocketman turned me on to.

From the front of the tank on, no wiring is visible

Last edited by 60Gunner; 4 Weeks Ago at 03:35..
Reply With Quote
  #24  
Old 4 Weeks Ago
60Gunner's Avatar
60Gunner 60Gunner is offline
Chief of Security
 
Join Date: Sep 2017
Location: United States
Posts: 1,383
Sportster/Buell Model: 1200/1250C
Sportster/Buell Year: 05
Reputation: 1626312
60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute
Default

Video of first run. Starts out with the enrichner valve pulled all the way out. As I get it pushed in it starts idling close to where I want 13.0 -13.4 but it's not warmed up yet. Once it is it idles 12.5 - 12.7 so I need to drop back to a 25 pilot to start.
Straight part of the needle where cruise is is close but a little rich. Low to mid 13s. It will lean out a little with a leaner pilot. 13.5 to 13.7, 13.8 is my target here.
My initial thoughts on the taper, acceleration 1/4 - 3/4 throttle is maybe a little lean. Not sure yet. Barely got into it once. Here's where I want 12 -12.5 on a hard pull.On decel I get a little popping and it hits 15 here and there. May be normal with open baffled exhaust it says. Maybe not enough decel timing. This is where they say these motors need 50° of timing. High rpm decel.
Tomorrow should be nice and mid 70s. Hope to get it dialed in a little better but it's close.
Overall I'm pretty pleased with this gauge. I think it's a great tool. But you can't skimp on these. It needs the good Bosch LSU4.9 sensor.


https://youtu.be/pIsyFw_09hw

Last edited by 60Gunner; 4 Weeks Ago at 03:49..
Reply With Quote
  #25  
Old 4 Weeks Ago
60Gunner's Avatar
60Gunner 60Gunner is offline
Chief of Security
 
Join Date: Sep 2017
Location: United States
Posts: 1,383
Sportster/Buell Model: 1200/1250C
Sportster/Buell Year: 05
Reputation: 1626312
60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute
Default

There's 2 more wires on the power harness I'm not using. It can connect to a data logger or to a computer using serial. It can be integrated into controlling EFI. Way over my head atm but it's a top notch setup. Comes with a white faceplate with chrome ring too.
There's also a 4 way switch/screw on the back to change modes. P0 -P4. P0/P1 is default and what I need to do AFR on the digital readout. The factory calibration is dead on tho you can calibrate if you so desire.

When I'm done, if there's any interest in this, I'd like to use it as a forum rental tool. Not to make money but to try and recoup a little and maybe save someone $150. I dropped $150`on this set up to use it for a few days.

Last edited by 60Gunner; 4 Weeks Ago at 04:10..
Reply With Quote
  #26  
Old 4 Weeks Ago
shanneba shanneba is offline
XL FORUM TEAM MEMBER
 
Join Date: Jul 2013
Location: Franklin, Indiana
Posts: 1,788
Sportster/Buell Model: XL1200C
Sportster/Buell Year: 2013
Reputation: 2354006
shanneba has a reputation beyond reputeshanneba has a reputation beyond reputeshanneba has a reputation beyond reputeshanneba has a reputation beyond reputeshanneba has a reputation beyond reputeshanneba has a reputation beyond reputeshanneba has a reputation beyond reputeshanneba has a reputation beyond reputeshanneba has a reputation beyond reputeshanneba has a reputation beyond reputeshanneba has a reputation beyond repute
Default

Since you have the Wide Band hooked up,

What AFR do you see when doing the idle mixture setup recommended for the HSR carbs?
AFR at turned in until slows / irregular
AFR at turned out until it slows or is irregular.
If set to middle position between the two, what AFR?

Next, run the engine until it reaches normal running temperature.
With the engine idling smoothly, adjust the pilot air screw in slowly
until the idle either slows or becomes irregular, then turn the screw out until
the engine again slows or begins to idle irregularly.
__________________
2013 XL1200C

Find your Owner's Manual, Wiring Diagram and Parts List here :

https://serviceinfo.harley-davidson....cle/lookupForm
Enter your VIN OR
Use the search - enter year and model

If something doesn't work on your Sportster look here:
SportsterPedia.com
Reply With Quote
  #27  
Old 4 Weeks Ago
60Gunner's Avatar
60Gunner 60Gunner is offline
Chief of Security
 
Join Date: Sep 2017
Location: United States
Posts: 1,383
Sportster/Buell Model: 1200/1250C
Sportster/Buell Year: 05
Reputation: 1626312
60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute
Default

13.3-13.5. A little leaner than I like for an idle but probably about right for most street bikes. I prefer more around 12.9-13.1 for an idle. Seems to idle a little better and cooler. Especially if you ever get stuck in traffic on a 95° day.
That said, you can get a couple different jets to work for idle with the screw but go with the one that transitions the smoothest to the needle.
I ended up at the 25 at 2 - 2 1/8 turns but it's also been a pretty cool spring. If I end up going past 2 1/2 turns when it ever gets warm out, I may even end up with the 22.5.
Keep in mind I'm a 1250 with the 570s at 630' above sea level so for a lot of you a 20 would probably be about right. Maybe 22.5.
The 97 needle puts me right around 13.4 - 13.6. Some like it a little leaner there for better mpg as this is where you cruise. I3.9 - 14.1 even.
At the middle groove with the clip I'll drop to the low 12s hammering down. Even 11.9 briefly. I might be a little rich here and I might try dropping the needle back down a notch but this isn't a good place to be lean if you twist it like I do. If anything I'd like to try a Y8 needle jet and drop in the 98 needle at groove 2 but probably won't at this point.
The main I think I'm pretty good at 170. Maybe a little rich? It was hard to read the gauge at this point and not crash but I don't want want to run out of juice when I do get into the main. I'm usually only there for 1 reason.
Also keep in mind I ended up with the 60 pump nozzle coming on a little late with this setup.

I was surprised at how much it leans out on decel overall.

I had to pull this gauge yesterday and probably won't run it again so it's up for grabs. If there's enough interest, I'll rent it out cheap for those that want it for set up like I did. Most likely sell it.
I had to change pipes because the ones I had installed had a sharp edge that cut into the SE style gaskets. I couldn't keep the flanges tight. They need the stock gaskets. I opted to cut my drag pipes that are flat at the end and no longer have a bung. The gauge comes with one to weld in but I learned what I need to so it's doubtful I will since it was never my intention to run the gauge permanently.

Last edited by 60Gunner; 4 Weeks Ago at 16:24..
Reply With Quote
Sponsored Links
  #28  
Old 4 Weeks Ago
harley506d's Avatar
harley506d harley506d is offline
XL FORUM TEAM MEMBER
 
Join Date: May 2017
Location: Lubersac/France
Posts: 906
Sportster/Buell Model: 1200c
Sportster/Buell Year: 2005
Reputation: 1234962
harley506d has a reputation beyond reputeharley506d has a reputation beyond reputeharley506d has a reputation beyond reputeharley506d has a reputation beyond reputeharley506d has a reputation beyond reputeharley506d has a reputation beyond reputeharley506d has a reputation beyond reputeharley506d has a reputation beyond reputeharley506d has a reputation beyond reputeharley506d has a reputation beyond reputeharley506d has a reputation beyond repute
Default

All good work you have done, enjoyed the write-ups.
Is the socket head screw in the stem loose? Usually holds the brake line.
__________________
"Procrastination is the thief of time"................90's Harley ad.
"Don't wait for your ship to come in, swim out and meet the bloody thing".................Barry Sheene.
Reply With Quote
  #29  
Old 4 Weeks Ago
60Gunner's Avatar
60Gunner 60Gunner is offline
Chief of Security
 
Join Date: Sep 2017
Location: United States
Posts: 1,383
Sportster/Buell Model: 1200/1250C
Sportster/Buell Year: 05
Reputation: 1626312
60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute60Gunner has a reputation beyond repute
Default

Quote:
Originally Posted by harley506d View Post
All good work you have done, enjoyed the write-ups.
Is the socket head screw in the stem loose? Usually holds the brake line.
Yes it is. I just stuck it back in there. I toyed with running the sensor wire thru it but didn't care for it anymore than I did my new brake line.
I should add that while maybe dropping $150ish on a gauge like this to use a few days might seem excessive, keep in mind what a dyno tune costs. You might think you got it right by ear, most of you would probably be surprised it's not as good as you think. Hate to find out the hard way. Especially after the money I've dropped on this build.

Last edited by 60Gunner; 4 Weeks Ago at 20:13..
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Sponsored Links
All times are GMT +1. The time now is 21:59.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
XL Forum® - Linson Media LLC