Send a note to Sportsterpedia Admin

[Nibelungen]

swedish vs german

SKF has a model similar to FAG 7200 B TVP and is named SKF 7200 BEP...
it has a slight different cage always of plastic polymer
there are also versions, like FAG does, with all metal cage

[Gearhead88]

I looked pretty thoroughly for the answer to a question I had about the size of standard bearing rollers for an Ironhead Transmission mainshaft on the right side . I looked in all of the service & parts manuals I have , It's not there . I lapped the outer race , I have a new mainshaft , it had been starting to pit in this area , the rollers I had are worn so I couldn't get a reliable measurment .

I was placing an order for parts , clips , washers and other items , when it came to the 23 bearing rollers we found the size of standard rollers in the fine print/ description our supplier provides .

HD # 9095 Standard = .1562"
HD # 9096 + .0004" = .1566"
HD # 9097 + .0008" = .1570"

It might be a good idea to add this info in the Ironhead transmission specs

[Hippysmack]

Thank you Nibelungen, sorry it took so long but life's been kicking me in the nuts.
I added that info on the XL bearings page.
http://www.sportsterpedia.com/doku.p...k:ref:genmsr91

Thanks also Gearhead88,
I added those part#s and dims to both wet and dry clutch transmission pages.
http://www.sportsterpedia.com/doku.p...h:transfinal02
http://www.sportsterpedia.com/doku.p...h:transfinal03

[brucstoudt]

http://xlforum.net/forums/showthread...1601769&page=2 the mainshaft roller sizes were here in the ironhead section from 10 years ago.posts #18 and 19.

[Andy56]

Small correction to the turn signal function.

http://sportsterpedia.com/doku.php/t..._license_light

2014-later Self-Cancelling Turn Signal Function

This:-
The 4-way flasher function is activated by momentarily pressing both the left and right turn signal buttons at the same time and cancelled in the same way.

ought to be something like this:-

The 4-way flasher function is activated by pressing the Hazard switch on the right hand control and cancelled in the same way.

[Andy56]

Small correction to the battery cable

http://sportsterpedia.com/doku.php/techtalk:ref:elec03b

The title is "Re-Routing 04-up Battery Cables"

but in 2014 the battery was turned around so the title might want to be

Re-Routing 2004-2013 Battery Cables

[Gearhead88]

Originally Posted by brucstoudt

http://xlforum.net/forums/showthread...1601769&page=2 the mainshaft roller sizes were here in the ironhead section from 10 years ago.posts #18 and 19.

I looked , the information I was looking for wasn't where I expected to find it , I'm still finding my way around here , a search I made came up empty .

[IXL2Relax]

Thanks, Andy56, for the info - I've updated those sections.


IXL _______ >>>> My Motorcycle Chronicles Are Here <<<<