|
|
|
<<
|
<
|
|
>
|
>>
|
 |
| MVC-374S |
|
Click on image to view larger image
|
|
|
Author
|
|
Thread
|
|
|
AussieGazza
Proud 2000 XLH 1430 Owner
Registered: March 2007
Location: Bywong
Posts: 1691
|
|
Sat 3 November 2007 21:57
|
|
|
The tools I made to get the centre on the brake disk holes. Just fits into the hole recess. Put disk on hub, put in hole and drill away! Use the same drill that you used to create the centred hole. Make sure that disk does not move.
------------------------------
[SIGPIC][/SIGPIC] AussieGarry
I'm not a complete idiot -- Some parts are missing (but on order from EBay).
Supertrapp 2-1 with 18 plates and closed end cap, 11.5" 412 Progressive with Heavy Duty springs and Progressive fork springs. Mikuni 45carb/SE 44 manifold. NRHS 88" with Stage 2 ported 04 heads with 15 degree squish band, SE .536 cams, crane roller rockers and lifters, NRHS Hurricane Adj Pushrods and Collapsible Covers. Ultima prog ign. 180 main jet, 3 turns, 20 idle jet and 97 needle at 3rd notch. AIM 240 Clutch. LRB Z Plus Brake Pads on dual front brakes. Kuryakyn Boss Blade Levers + Forcewinder XR A/C.
|
|
|
|
|
|
|
|
Statistics
|
| Users |
38,128 |
| Photos |
37,118 |
| Comments |
10,334 |
| Views |
177,298,524 |
| Disk Space |
5,923.4mb |
|
| May 2013 |
| Sun | Mon |
Tue | Wed |
Thu | Fri |
Sat | | | | | 1 | 2 | 3 | 4 | | 5 | 6 | 7 | 8 | 9 | 10 | 11 | | 12 | 13 | 14 | 15 | 16 | 17 | 18 | | 19 | 20 | 21 | 22 | 23 | 24 | 25 | | 26 | 27 | 28 | 29 | 30 | 31 | |
|
|
Powered by: PhotoPost PHP vB3 Enhanced
Copyright 2005 All Enthusiast, Inc.
All times are GMT +1. The time now is 20:16.
The Sportster and Buell Motorcycle Forum
