Clutch ramp stakeing

[BigRodney]

Hey folks, I'm working in my shop and only have Internet via my phone right now. There was a thread that showed a clutch ramp held in the primary cover with 3 taper head machine screws. I can't find it searching on this phone. Help a brother out?

[russzx6]

I'm just about to go camping for 4 days . .you'd be talking of this pic of my 77 clutch ramp mechanism

http://i285.photobucket.com/albums/ll65/russzx6/IMG_6428.jpg

[BigRodney]

That's it, thank you very much, working on mine right now.

[cafe carl]

Small long nose vise-grips lightly holding from the outside (learned from this forum) I'll never stake again.

[IronMick]

Small long nose vise-grips lightly holding from the outside (learned from this forum) I'll never stake again.

+1

I use a medium to large plier because that is what i have. It must be needle nose, vice grip.

[ezmerf]

I would be afraid to add the screws.Even with loctite I'd worry those lil suckers would end up in my chain and cause a major headache.

[nikki]

I would be afraid to add the screws.Even with loctite I'd worry those lil suckers would end up in my chain and cause a major headache.+ 1 I gave it a thought a few years back but felt the screws could cause alot of trouble . so I staked the fixed part in . Nikki