Hi there,need a bit of help,just fitted the HD Tach kit 67182-95D to my 2003 883 XLH.Think I got it mostly right as the tach works fine and so does the speedo,however my neutral and low oil press lights no longer work(the indicators/hi beam work fine).I suspect I screwed up somewhere on the Deutsch connector but am darned if I can figure out what I did wrong,So anybody got any help/tips etc etc as the instruction paper from HD with the kit is hopeless.:censor
Thanks in advance from Hong Kong.

damn, threw out instructions. i do remember somthing with removing somepins from back of speedo and splicing BUT one of those wires didnt get used. did you reinstall that wire? thats all i can think of.
stock harness pin2 from tach connects with pin8 of speedo.
also pin 1 of tach to pin6 of connector under eyebrow
pin 3 of tach to pin7 of connector


pin one of tach is orange wire connects to nuetral and oil lights.


hope this helps

Check THIS great site out!

http://harleyhog.co.uk/instructionsheets.htm

and see the attached instructions for that tach...

Hope that helps lagerdrinker assist you!!

Thks Guys,still got the instructions but feel sure I got a couple of the pins wrong and do not have the service manual so cannot chk.
But thanks for the help.cheers:(

Yeeah,ok studied Berts photos from all angles and managed to get it sorted out,thanks to all.Guess I need to buy a Service manual after all....cheers:banana