PDA

View Full Version : Changing indicators


nitrosporty
7th May 2006, 11:04
I have just purchased two sets of kellermann indicators. I removed the nut on the rear stem but could not remove the the stem. There was no movement at all. I know there are two holes in the fender strut covers one for the wires and the other for the stem bolt. Why can I not remove the stem when the nut has been removed. Any help would be greatly appreciated.

Vegas1200C
7th May 2006, 11:36
Try loosening all of the bolts on the strut. Maybe the stem is pinched laterally between the fender and strut.