PDA

View Full Version : Checking for an intake Leak ?


sevens0n
29th April 2009, 01:51
Does anyone know an easy way to check the intake manifold seal for leaks with the carberator off the bike? Are the seals in any way problematic on a Stock 93? They are brand new. As is the rest of the motor.

I tried to start my 93XL for the first time. And pretty much determined that I have carb problems. I would like to be able verify the manifold is sealed before I put it all back together. "After going through the carb that is"

I'm getting frustrated that I couldn't get it to run. Just want to try to cover all the bases before my next attempt.

Thanks....

t.c. Johnson
29th April 2009, 03:15
I don't know of any good way with the bike apart. I don't know of a way that works well with it together.

Just put the gaskets in the way the factory manual describes it. It seems a$$ backwards but it seems to be the best way.

Dieselox4
29th April 2009, 03:43
Intake and exhaust gas leak tests

Best ways i have ever used. You will have to get the bike running thow. I used the Tape over the intake gaskets. Worked excellent

http://xlforum.net/vbportal/forums/showthread.php?t=39766

Mike