ok the wife wants buck horn bars put on her bike so we now have a set hanging on the wall what i need to know is what size cables & brake like we need its an 01 1200 C going from drag bars to buck horn bars !:tour

Dats easy, put bars over other bars and start measuring and add a little for curves and ya shuld be just fine and remember, you don't want tight curves and make sure they don't rub on anything impotant
ETB

While you're at it, get her a cramp buster.

When I ride either of my GF's bikes ('77 Ironhead and an '87 Virago both with buckhorn style bars), my right hand cramps. I have an '03 883 with stock bars on 4 1/2" pull back rises, and my hands never cramp.

ok the wife wants buck horn bars put on her bike so we now have a set hanging on the wall what i need to know is what size cables & brake like we need its an 01 1200 C going from drag bars to buck horn bars !:tour

Buckhorns....... although they are my favorite looking bar, I have to say that I actually began having real, by-God carpal tunnel issues.....as soon as I changed bikes, (a'la the Bambi Incident), it went completely away......

Just one bum's observation....... :laugh

Oh, and to answer your question, I went with 6" over on everything and was fine on my 02 883C (http://xlforum.net/photopost/showgallery.php?cat=544).....

Although I DID run the wires thru the bars.....the wiring isn't included in this estimate, but would probably be near the same.......