I know what it looks like and where it is but I was reading it (for once) and I see one of the pins is labeled for "Speed". is that flasher speed? that wouldnt not be speedo would it?
Willy

Sounds like the input to the module from the speedo which lets the module figure out how long before turning off the turn signals. Roger

Yes - the "speed" contact is for the signal from the speedometer.

so if I take that box off (I removed all my turn signals) my speedo wont work?
sorry I didnt word it better.

Your speedo will work fine without that box. The opposite is not true. If you remove your speedo or at least remove the green/white wire signal to the box, the signals will flash until you manually turn them off.

So, if you removed the signals, you can remove the box. Save all that stuff in case you need to reinstall it in the future.

--Chris