primary bolt sizes and lengths

95evo · #1 14th November 2011

so i got the bike running yesterday. and i went to ride into work this morning and i lost a few bolts from my primary. does anyone kno the correct sizes and lengths of the bolts? would be greatly appreciated cuz im now stuck at work.

Bob F · #2 14th November 2011

HD # 4820A 1/4X20 X 2" socket hd.

bustert · #3 16th November 2011

take a stick or wire and insert in the hole, mark and measure, make allowances so it does not bottom out in the hole.

edmvnd · #4 31st May 2012

it seems like i've run across a number of posts where people are alluding to there being two different size bolts on the primary cover. i thought there was only one size bolt there.

i just took off the primary the other day to inspect and when i threw it back on, one bolt took a little more pressure than normal to get in. nothing drastic, but i thought this could account for it. maybe it was bent slightly?

couldn't find anything in the manual about it. probably just paranoid.

td67mustang · #5 31st May 2012

Site to see the microfiche ....

http://partsfinder.onlinemicrofiche.....asp?make=hdmc

edmvnd · #6 31st May 2012

Quote:

Originally Posted by td67mustang

Site to see the microfiche ....

http://partsfinder.onlinemicrofiche.....asp?make=hdmc

super helpful. thanks for showing me that site. going to be rifling through it endlessly now.

td67mustang · #7 31st May 2012

if you add the items to your cart and go to the check out it will display the part numbers.. alot easier to call a dealer and ask to order part # XZY than trying to explain "um yeah.. I lost 2 bolts on my primary, one is like closest to the front, but not the top one.... " You know what i mean, ya enjoy its alot of fun and a good reference when working on the bike as well.